Carter-Waters - 2020 3M™ VHB™ Structural Glazing Tape Project Initiation Form 1.1

Please fill out all required fields to initiate a project Application Review by 3M and PVD. Note: Customer assumes responsibility for meeting all applicable building codes and requirements.

Customer Information

Customer

Distributor Representative

How did you become aware of 3M™ VHB™ Structural Glazing Tape?

If other please specify below:

If other, please specify here:

Street Address

City

State

Zip Code

Customer Contact

Customer Contact Title

Customer Contact Phone

(xxx-xxx-xxxx)

Customer Contact Cell

Customer Contact Email

Fabrication Information

Customer Fabrication

Is this project being fabricated in-house at the location listed above? If no, provide the location of application of VHB™ SGT.

Yes

Fabrication Start Date

mm/dd/yyyy

Fabricator Name

If different than Customer

Street Address

Note: Actual place of VHB™ SGT bonding

City

Note: Actual place of VHB™ SGT bonding

State

Note: Actual place of VHB™ SGT bonding

Zip Code

Note: Actual place of VHB™ SGT bonding

Project Information

Project Name

As described in Contract Documents

Street Address

City

Project State

Zip Code

General Contractor

Glazing Consultant

Architectural Firm

Project Files

Upload Shop Drawings, and other pertinent documents such as specification sections, glazing and finish schedules

If files are larger than 29 MB, please add link from cloud based storage such as One Drive, Box, Dropbox, etc. in the next field

Drop your files here

Dropbox Link

If files are larger than 29 MB, please add link from cloud based storage such as One Drive, Box, Dropbox, etc. below

Project-Specific Design Parameters

Building Height

Glazed area

Building Stories

Number of floors

Windload Design Pressure Category

ASCE 7-2005

ASCE 7-2010

IBC

Other

If Other Design Category

Typical Zone PSF

Corner Zone PSF

Aluminum Framing System and Glazing Infills

Glazing System

List the system type and model

Other Finish

Identify type and specification

Sloped Glazing

Glass sloping outward requires minimum two sides of support or other forms of positive hold and approval

Yes

Vision Glass: Insulating Glass Unit (IGU)

Yes

Vision Glass: Laminated IGU

Yes

Vision Glass: Monolithic

Yes

Vision Glass: Laminated

Yes

Spandrel Glass: IGU

Yes

Spandrel Glass: Monolithic

Yes

Bonding Surface Spandrel Coating

Note: VHB™ SGT develops high bond strength to most ceramic frit coatings. If Opacicoat is used, it requires masking off the bond area of the glass perimeter prior to application without contamination underneath it.

Metal Panel

List type of panel i.e. ACM or Insulating and description of bonding surface finish

Other Glazing Infill

Longest Glazing Infill Short Edge in Inches

For the entire project: the longest short-edge dimension of infill panel per the aspect ratio e.g. 48" x 96" = 48" or 60" x 48" = 48"

Largest Infill Size W" x H"

Largest single piece of glass or panel with the greatest area

Total Square Footage VHB™ SGT Glazing Area

VHB™ Structural Glazing Tape

VHB™ SGT Type

B23F Black

G23F Grey

VHB™ SGT Width

Note: Specific to system application. Not suitable for widths less than 5/8" without advanced 3M™ approval

Total Project LF Tape

Estimated lineal footage of the entire project for systems that use VHB™ SGT

It may take up to 5 business days for Application Review to be complete

Once the Application Review is complete tape can be ordered from your 3M™ VHB™ Tapes Select Distributor.

Report Abuse