Garvin Construction Products - 2020 3M™ VHB™ Structural Glazing Tape Project Initiation Form 1.1

Please fill out all required fields to initiate a project Application Review by 3M and PVD. Note: Customer assumes responsibility for meeting all applicable building codes and requirements.

Customer Information


Select or enter value
Caret IconCaret symbol

If other please specify below:

Select or enter value
Caret IconCaret symbol
Select or enter value
Caret IconCaret symbol

(xxx-xxx-xxxx)

Fabrication Information


Customer Fabrication*

Is this project being fabricated in-house at the location listed above? If no, provide the location of application of VHB™ SGT.

If different than Customer

Note: Actual place of VHB™ SGT bonding

Note: Actual place of VHB™ SGT bonding

Note: Actual place of VHB™ SGT bonding

Note: Actual place of VHB™ SGT bonding

Project Information


As described in Contract Documents

Project Files

Upload Shop Drawings, and other pertinent documents such as specification sections, glazing and finish schedules


If files are larger than 29 MB, please add link from cloud based storage such as One Drive, Box, Dropbox, etc. in the next field

Drag and drop files here or

Project-Specific Design Parameters


Glazed area

Number of floors

Windload Design Pressure Category*

Aluminum Framing System and Glazing Infills


Glazing System Manufacturer*

List the system type and model

Aluminum Finish*

Note: At the bonding area

Identify type and specification

Sloped Glazing*

Glass sloping outward requires minimum two sides of support or other forms of positive hold and approval

Vision Glass: Insulating Glass Unit (IGU)*
Vision Glass: Laminated IGU*
Vision Glass: Monolithic*
Vision Glass: Laminated*
Spandrel Glass: IGU*
Spandrel Glass: Monolithic*
Bonding Surface Spandrel Coating*

Note: VHB™ SGT develops high bond strength to most ceramic frit coatings. If Opacicoat is used, it requires masking off the bond area of the glass perimeter prior to application without contamination underneath it.

List type of panel i.e. ACM or Insulating and description of bonding surface finish

For the entire project: the longest short-edge dimension of infill panel per the aspect ratio e.g. 48" x 96" = 48" or 60" x 48" = 48"

Largest single piece of glass or panel with the greatest area

VHB™ Structural Glazing Tape


VHB™ SGT Type*

Note: Specific to system application. Not suitable for widths less than 5/8" without advanced 3M™ approval

Estimated lineal footage of the entire project for systems that use VHB™ SGT

It may take up to 5 business days for Application Review to be complete

Once the Application Review is complete tape can be ordered from your 3M™ VHB™ Tapes Select Distributor.